CHLORINSITU IIa Electrolysis System
Output of 3 - 15 PPD (60 - 300 g/h) chlorine
The NEW ProMinent CHLORINSITU IIa is a safe, compact and efficient method of producing chlorine on-demand and on-site using only salt and water! This compact system efficiently eliminates the need to purchase, transport and store large (and costly) amounts of bleach, thus eliminating all of the common issues associated with bleach storage.
Added benefits of "just in time" chlorine use:
- No mess (spills, carboys, trucks, leakage, etc.)
- Minimal footprint for the actual system and only need to store bags of salt (instead of large tanks of bleach)
- Remote monitoring and interface with ProMinent ppm technology and feed equipment
- “on-demand” use of product
The CHLORINSITU IIa combines the proven and durable design of the open electrolysis cell with an innovative design. An exceptional quality of hypochlorite solution is achieved, while the salt and power consumption could be decreased.
The chlorate content of the product is significantly below the limit value specified in EN 901.
All relevant system components are accommodated in a compact and space-saving housing. Integral hydrogen discharge enables the system to be installed without any need for specific ventilation requirements for the installation place (no ATEX).
The system is immediately ready for use, thanks to the plug-and-play concept. Operation of the electrolysis system has been consciously kept simple.
Request more info
Available scope of delivery
- Corrosion-proof housing with ventilation fan
- Control with multicolored touch panel
- Remote maintenance module
- Salt dissolving tanks outside of the housing
- Integrated product tank with diaphragm metering pump for metering the chlorine solution
- Integrated softener
Benefits
- NSF 61 Approved
- Durable design, transparent technology
- Low-chlorate product (below the EN 901 limit value)
- High output
- Excellent safety
- Minimal space requirement
- Minimal maintenance work and ease of operation
Field of application
- Potable water
- Swimming pools
- Horticulture and animal breeding
| Model | 60 g/h | 120 g/h | 180 g/h | 240 g/h | 300 g/h |
|---|---|---|---|---|---|
| Installation capacity (FAC) | 3 PPD | 6 PPD | 9 PPD | 12 PPD | 15 PPD |
| Production capacity | 23.25 h/day1 | ||||
| Salt conversion | 3.0 kg/kg FAC | ||||
| Engery consumption DC | 4.0 kWh/kg FAC | ||||
| FAC concentration2 | 9,000 ppm ± 10% (0.9% ± 10%) | ||||
| pH product (Approx..) | 9.5 | ||||
| Amount of cells | 1 | 2 | 3 | 4 | 5 |
| Hydrogen safety discharge system | No room ventilation required. Integrated hydrogen dilution air discharge pipe to outside | ||||
| Product (NaOCl) volume | 1.7 GPH 40 GPD |
3.5 GPH 81 GPD |
5.2 GPH 121 GPD |
6.9 GPH 161 GPD |
8.7 GPH 201 GPD |
| Chlorate | < 4% of FAC | ||||
| Powersupply | 240 VAC ± 10%, L1, L2, GND 60 Hz | ||||
| Nominal Energy use | 0.5 kW | 0.8 kW | 1.1 kW | 1.4 kW | 1.7 kW |
| Advised Extrenal installation fuse | C15A | ||||
| Product (NaOCl) volume | 0.42 lbs. 9.2 PPD |
0.8 lbs. 18.4 PPD |
1.2 lbs. 27.6 PPD |
1.6 lbs. 36.8 PPD |
2.0 lbs. 46 PPD |
| Salt requirements | Salt tablets specifications: > 99.4 % NaCl, Insoluble substances = max. 0.05 % Iron (Fe) = max. 10 ppm, Manganese (Mn) = max. 10 ppm Calcium + Magnesium (Ca + Mg) = max. 100 ppm |
||||
| Max. ambient humidity | 85% | ||||
| Ambient temperature | 50 °F - 104 °F (10 - 40 °C) | ||||
| Ambient conditions | Ambient air non-condensating, non-corrosive and dust free air within the installation room | ||||
| Integrated product storage tank | 15 Gallon | ||||
| External brine tank | 45 Gallon (⌀24" x 28") | ||||
| Applications | Process water, cooling towers and potable water | ||||
| Approvals/ Certifications | NSF61 (Approved) EPA Est.# 95837-CAN-1 |
||||
1 Based on the regeneration of the softener once a day for <45 minutes
2 The product quality is depending on water quality, water volume, temerature, and salt specification